Java Mine
ContentsIndexHome
PreviousUpNext
Gateway Members

The following tables list the members exposed by Gateway.

 
Name 
Description 
 

Allows the Gateway to grab sensors that are not in it's sensor list for a specific amount of time in minutes  
 

This is a name assigned by the cellular provider for their specific m2m network.  
 
private List RegisteredSensors; Missing Attributes *

  • The Channel that the Radio talks over if set the gateway will ever only talk on that channel defaults allows the channel change when the gateway is reformed.
 
 

The IP address of the router that the gateway funnels network traffic to  
 

If the network connection is not available, the gateway will disable the sensor network allowing sensors to relink to a different gateway. 
 
This is ExternalIdentifier, a member of class Gateway. 
 

The primary IP address of a DNS server the Gateway can use to get it's IP address from  
 

The specific firmware version the APN of the gateway uses this is separate from the RadioFirmwareVersion  
 

The unique identifier for the gateway  
 

The IP address of the gateway  
 

Type of power mode used by the gateway determines the value of a charging battery  
 

The subnet mask for the gateway. used specifically for cell gateways and Ethernet gateways. 
 

The specific type of gateway such as CGW3, Ethernet, USB.  
 

this lets the gateway know if it has a control or local notifier message  
 

Allows the System to know when to update the gateway  
 
This is NetworkIDFilter, a member of class Gateway. 
 

Some data networks will require a username and sometimes a password for cell gateways this stores the Password  
 

this is set for a gateway if there is an ACC that should be pushed to the gateway.  
 

polls the server to find out if there is any data that needs to be sent down to the sensors this includes but is not limited to updates and notifications this does not send up sensor data collected by the gateway  
 
Port 

The Primary port of the Server that the gateway will be talking to.  
 

The Secondary port for a gateway to send sensor data through  
 
22 system power supply 1-Line Power, 2-Battery, 3-Battery and GPS 
 

The specific firmware version the radio on the gateway is using  
 

This is how often the gateway will pass data to the Server collecting sensor data  
 

The secondary IP address of a DNS server the Gateway can use to get it's IP address from  
 

Sets the gateway to reform the network it is on changes the channel and clears and re-downloads the gateway list  
 
This is SensorID, a member of class Gateway. 
 

the Primary host address that the gateway will be talking to.  
 

The Secondary host address for a gateway to send sensor data through  
 
This is SingleQueueExpiration, a member of class Gateway. 
 

Some data networks will require a username and sometimes a password for cell gateways this stores the Username  
 
Name 
Description 
 

allows you to add a single byte array to your action control command
 
 
This is the overview for the BatteryPercentageHelper method overload. 
 

sets the isdirty flag to true  
 
This is the overview for the Gateway constructor overload. 
 

gets a list of byte arrays that are the action control commands for the gateway  
 
This is getAutoConfigCommand, a member of class Gateway. 
 
This is getAutoConfigTime, a member of class Gateway. 
 
This is getDecryptFailureDate, a member of class Gateway. 
 

gets the Router Address the gateway will use to pass traffic through  
 
This is getEncryptionIV, a member of class Gateway. 
 
This is getEncryptionKey, a member of class Gateway. 
 
This is getExternalIdentifier, a member of class Gateway. 
 

gets the primary dns of the gateway  
 

gets the APN firmware version of the gateway
 
 

Gets the Gateways unique identifier
 
 

gets the gateways IP address  
 

gets the SubNetMask of the gateway  
 

gets the gateways type
 
 
This is getGPSReportInterval, a member of class Gateway. 
 
This is getHasUrgentTraffic, a member of class Gateway. 
 

gets if the sensor needs to be updated or not  
 
This is getLastSequence, a member of class Gateway. 
 

gets how often the gateway will get the sensor list updated  
 

gets weather or not the gateway uses observeAware  
 
This is getPendingActionControlCommand, a member of class Gateway. 
 

gets the poll interval  
 

gets the primary port the gateway will send data through  
 

gets the pre-shared key that should be on the gateway  
 

gets the Radio Firmware Version of the gateway
 
 

gets the report interval of the gateway  
 

gets the secondary dns of the gateway  
 
This is getSendResetNetworkRequest, a member of class Gateway. 
 

gets the primary server host address the gateway sends data to  
 

Reforms the gateways network updating the gateways channel and re-downloading the sensor list for the gateway  
 

sets action control commands for the gateway
 
 
This is setAutoConfigTime, a member of class Gateway. 
 
This is setDecryptFailureDate, a member of class Gateway. 
 
This is setGPSReportInterval, a member of class Gateway. 
 

sets if the gateway should be updated or not
 
 
This is setLastSequence, a member of class Gateway. 
 

Sets how often the gateway list with be updated
 
 

sets if the gateway should observe the aware state of a sensor
 
 

 
 

updates everything needed to change the gateway IP
 
 

updates the poll interval of the gateway
 
 

updates the gateways heartbeat in minutes
 
 

updates the host and port on the gateway
 
Copyright (c) 2017. All rights reserved.
What do you think about this topic? Send feedback!