Name 

Description 

 

Gateway 

This is the overview for the Gateway constructor overload. 

 

Name 

Description 

 

addActionControlCommand 

allows you to add a single byte array to your action control command
 

 

BatteryPercentageHelper 

This is the overview for the BatteryPercentageHelper method overload. 

 

ForceConfiguration 

sets the isdirty flag to true  

 

getActionControlCommands 

gets a list of byte arrays that are the action control commands for the gateway  

 

getDefaultRouterIP 

gets the Router Address the gateway will use to pass traffic through  

 

getGatewayDNS 

gets the primary dns of the gateway  

 

getGatewayFirmwareVersion 

gets the APN firmware version of the gateway
 

 

getGatewayID 

Gets the Gateways unique identifier
 

 

getGatewayIP 

gets the gateways IP address  

 

getGatewaySubnet 

gets the SubNetMask of the gateway  

 

getGatewayType 

gets the gateways type
 

 

getIsDirty 

gets if the sensor needs to be updated or not  

 

getNetworkListInterval 

gets how often the gateway will get the sensor list updated  

 

getObserveAware 

gets weather or not the gateway uses observeAware  

 

getPollInterval 

gets the poll interval  

 

getPort 

gets the primary port the gateway will send data through  

 

getPreSharedKey 

gets the pre-shared key that should be on the gateway  

 

getRadioFirmwareVersion 

gets the Radio Firmware Version of the gateway
 

 

getRegisteredSensors 

gets a list of sensors  

 

getReportInterval 

gets the report interval of the gateway  

 

getSecondaryDNS 

gets the secondary dns of the gateway  

 

getServerHostAddress 

gets the primary server host address the gateway sends data to  

 

ReformNetwork 

Reforms the gateways network updating the gateways channel and re-downloading the sensor list for the gateway  

 

RegisterSensor 

Registers a single sensor to this gateway
 

 

setActionControlCommands 

sets action control commands for the gateway
 

 

setIsDirty 

sets if the gateway should be updated or not
 

 

setNetworkListInterval 

Sets how often the gateway list with be updated
 

 

setObserveAware 

sets if the gateway should observe the aware state of a sensor
 

 

setPort 

 

 

UnRegisterSensor 

unregisters a specific sensor from a gateway removes the sensor from the sensor list
 

 

UpdateGatewayIP 

updates everything needed to change the gateway IP
 

 

UpdatePollInterval 

updates the poll interval of the gateway
 

 

UpdateReportInterval 

updates the gateways heartbeat in minutes
 

 

UpdateServerInformation 

updates the host and port on the gateway