Parameters 

Description 

Sensor sens 

the Sensor object to be updated  

Double heartBeat 

How often the sensor communicates with the gateway if no activity recorded.  

Double awareStateHeartBeat 

How often the sensor communicates with the gateway while in Aware State.  

Double maxPowerThreshold 

If the sensor is not aware and power accumulation exceeds this value in a single standard heartbeat the sensor will become aware and report immediately.  

Double awareMaxPowerThreshold 

If the sensor is aware and power accumulation is less than this value the sensor will become not aware.  

Double defaultFrequency 

Default Frequency of the power system.  

Boolean activeChannel1 

Active power channels. Channel 0 is always active because the sensor is also power through this channel.  

Boolean activeChannel2 

Active power channels. Channel 0 is always active because the sensor is also power through this channel.  

Boolean accumulate 

Setting this will cause the kWh reading to accumulate.  

Double kWhLEDFlashesEvery 

kWh LED will flash every time this many Wh are accumulated. Saving this value as 0 will turn off the LED.  

Integer failedTransmissionsBeforeLinkMode 

The number of transmissions the sensor sends without response from a gateway before it goes to battery saving link mode. In link mode the sensor will scan for a new gateway and if not found will enter battery saving sleep mode for 2 hours before trying to scan again. Lower number will allow sensors to find new gateways with fewer missed readings. Higher numbers will cause the sensor to hold it setting in a noisy RF environment better. (Zero will cause the sensor to never enter link mode. to find a new gateway channel the battery will have to be cycled out of the sensor.)