Parameters 

Description 

Sensor sens 

the Sensor object to be updated  

Double heartBeat 

How often the sensor communicates with the gateway if no activity recorded.  

Double awareStateHeartBeat 

How often the sensor communicates with the gateway while in Aware State.  

Double xDeltaValue 

Acceptable range for X values to deviate before triggering again.  

Double yDeltaValue 

Acceptable range for Y values to deviate before triggering again.  

Double zDeltaValue 

Acceptable range for Z values to deviate before triggering again.  

Double magDeltaValue 

Acceptable range for magnitude values to deviate before triggering again.  

Integer outputDataRate 

Output data rate frequency at which data is output into FIFO buffer (6 Hz = 31,12 Hz = 29,50 Hz = 21,100 Hz =19).  

Integer accelerometerMode 

Modes for accelerometer (0 = 2G,16 = 2G HPF,1 = 4G,17 = 4G HPF,2 = 8G,18 = 8G HPF).  

Integer reArmTime 

Time before accelerometer measurements will resume.  

Integer failedTransmissionsBeforeLinkMode 

The number of transmissions the sensor sends without response from a gateway before it goes to battery saving link mode. In link mode the sensor will scan for a new gateway and if not found will enter battery saving sleep mode for 2 hours before trying to scan again. Lower number will allow sensors to find new gateways with fewer missed readings. Higher numbers will cause the sensor to hold it setting in a noisy RF environment better. (Zero will cause the sensor to never enter link mode. to find a new gateway channel the battery will have to be cycled out of the sensor.)