Parameters 

Description 

Sensor sens 

the Sensor object to be updated  

Double heartBeat 

How often the sensor communicates with the gateway if no activity recorded.  

Double minimumPitchThreshold 

Any Pitch below this threshold will put the sensor in the Aware State.  

Double maximumPitchThreshold 

Any Pitch above this threshold will put the sensor in the Aware State.  

Integer measurementStability 

Number of measurements after a movement into a valid UP or DOWN region to wait until reporting the current pitch and status.  

Integer stuckTimeOut 

Number of seconds after movement out of a valid UP or DOWN region to wait until reporting stuck.  

Integer axisMode 

Rotational Axis that the sensor will tilt around. (0 is +X, 1 is -X, 2 is +Y, 3 is -Y, 4 is +Z, 5 is -Z) (ONLY ENABLED FOR ALTA MODE)  

Integer dataMode 

Select 1= Up/Down vs 0 = Delta MODE  

Integer awareMode 

0= None/ 1 = On Change(Delta Exceeded)/2 = Not Down/ 3 = Not Up / 4= Stuck [Delta Mode only shows options 0 and 1]  

Integer rearmTime 

After the sensor triggers due to the delta value being exceeded, it must wait this long before it can trigger again  

Integer failedTransmissionsBeforeLinkMode 

The number of transmissions the sensor sends without response from a gateway before it goes to battery saving link mode. In link mode the sensor will scan for a new gateway and if not found will enter battery saving sleep mode for 2 hours before trying to scan again. Lower number will allow sensors to find new gateways with fewer missed readings. Higher numbers will cause the sensor to hold it setting in a noisy RF environment better. (Zero will cause the sensor to never enter link mode. to find a new gateway channel the battery will have to be cycled out of the sensor.) 

awareStateHeartBeat 

How often the sensor communicates with the gateway while in Aware State.