Allows for the update of the specific type of sensor. @param sens the Sensor object to be updated @param heartBeat How often the sensor communicates with the gateway if no activity recorded. @param awareStateHeartBeat How often the sensor communicates with the gateway while in Aware State. @param xDeltaValue Acceptable range for X values to deviate before triggering again. @param yDeltaValue Acceptable range for Y values to deviate before triggering again. @param zDeltaValue Acceptable range for Z values to deviate before triggering again. @param magDeltaValue Acceptable range for magnitude values to deviate before triggering again. @param outputDataRate Output data rate frequency at which data is output into FIFO buffer (6 Hz = 31,12 Hz = 29,50 Hz = 21,100 Hz =19). @param accelerometerMode Modes for accelerometer (0 = 2G,16 = 2G HPF,1 = 4G,17 = 4G HPF,2 = 8G,18 = 8G HPF). @param reArmTime Time before accelerometer measurements will resume. @param failedTransmissionsBeforeLinkMode The number of transmissions the sensor sends without response from a gateway before it goes to battery saving link mode. In link mode the sensor will scan for a new gateway and if not found will enter battery saving sleep mode for 2 hours before trying to scan again. Lower number will allow sensors to find new gateways with fewer missed readings. Higher numbers will cause the sensor to hold it setting in a noisy RF environment better. (Zero will cause the sensor to never enter link mode. to find a new gateway channel the battery will have to be cycled out of the sensor.)

GeforceMaxAvgBase Methods