Name 

Description 

 

addActionControlCommand 

allows you to add a single byte array to your action control command @param comm is a byte array command for a gateway 

 

BatteryPercentageHelper 

This is the overview for the BatteryPercentageHelper method overload. 

 

ForceConfiguration 

sets the isdirty flag to true  

 

Gateway 

This is the overview for the Gateway constructor overload. 

 

getActionControlCommands 

gets a list of byte arrays that are the action control commands for the gateway  

 

getAutoConfigCommand 

This is getAutoConfigCommand, a member of class Gateway. 

 

getAutoConfigTime 

This is getAutoConfigTime, a member of class Gateway. 

 

getDecryptFailureDate 

This is getDecryptFailureDate, a member of class Gateway. 

 

getDefaultRouterIP 

gets the Router Address the gateway will use to pass traffic through  

 

getEncryptionIV 

This is getEncryptionIV, a member of class Gateway. 

 

getEncryptionKey 

This is getEncryptionKey, a member of class Gateway. 

 

getExternalIdentifier 

This is getExternalIdentifier, a member of class Gateway. 

 

getGatewayDNS 

gets the primary dns of the gateway  

 

getGatewayFirmwareVersion 

gets the APN firmware version of the gateway @return gets the version as a string 

 

getGatewayID 

Gets the Gateways unique identifier @return gateway id as an integer 

 

getGatewayIP 

gets the gateways IP address  

 

getGatewaySubnet 

gets the SubNetMask of the gateway  

 

getGatewayType 

gets the gateways type @return the gateway type as an eGatewayType 

 

getGPSReportInterval 

This is getGPSReportInterval, a member of class Gateway. 

 

getHasUrgentTraffic 

This is getHasUrgentTraffic, a member of class Gateway. 

 

getIsDirty 

gets if the sensor needs to be updated or not  

 

getLastSequence 

This is getLastSequence, a member of class Gateway. 

 

getNetworkListInterval 

gets how often the gateway will get the sensor list updated  

 

getObserveAware 

gets weather or not the gateway uses observeAware  

 

getPendingActionControlCommand 

This is getPendingActionControlCommand, a member of class Gateway. 

 

getPollInterval 

gets the poll interval  

 

getPort 

gets the primary port the gateway will send data through  

 

getPreSharedKey 

gets the pre-shared key that should be on the gateway  

 

getRadioFirmwareVersion 

gets the Radio Firmware Version of the gateway @return brings back the version as a string 

 

getReportInterval 

gets the report interval of the gateway  

 

getSecondaryDNS 

gets the secondary dns of the gateway  

 

getSendResetNetworkRequest 

This is getSendResetNetworkRequest, a member of class Gateway. 

 

getServerHostAddress 

gets the primary server host address the gateway sends data to  

 

ReformNetwork 

Reforms the gateways network updating the gateways channel and re-downloading the sensor list for the gateway  

 

setActionControlCommands 

sets action control commands for the gateway @param actionControlCommands is a list of byte arrays 

 

setAutoConfigTime 

This is setAutoConfigTime, a member of class Gateway. 

 

setDecryptFailureDate 

This is setDecryptFailureDate, a member of class Gateway. 

 

setGPSReportInterval 

This is setGPSReportInterval, a member of class Gateway. 

 

setIsDirty 

sets if the gateway should be updated or not @param isdirty allows the system to know if the gateway should be updated or not 

 

setLastSequence 

This is setLastSequence, a member of class Gateway. 

 

setNetworkListInterval 

Sets how often the gateway list with be updated @param networkListInterval how often in minutes the gateway will get an updated sensor list 

 

setObserveAware 

sets if the gateway should observe the aware state of a sensor @param observeAware if true will send all data being held regardless of report interval 

 

setPort 

 

 

UpdateGatewayIP 

updates everything needed to change the gateway IP @param staticIP Static IP address that the gateway should be set to @param subnet The SubNetMask of the gateway @param defaultRouter The IP address of the router the gateway should be talking through @param primaryDNS The primary DNS IP address @param secondaryDNS The secondary DNS IP address 

 

UpdatePollInterval 

updates the poll interval of the gateway @param pollInterval the value in minutes of how often the gateway should check for messages from the server 

 

UpdateReportInterval 

updates the gateways heartbeat in minutes @param reportInterval the heartbeat value in minutes the gateway should be updated to. 

 

UpdateServerInformation 

updates the host and port on the gateway @param host is the primary host address that the gateway should talk to @param port is the primary port the gateway should talk to