eSensorApplication Enumeration

Application type of sensor. Certain settings are interpreted differently for different types of sensors

Syntax

public enum eSensorApplication { DC_Voltage_1V = 1, Temperature = 2, Dry_Contact = 3, Water_Detection = 4, Activity_Detection = 5, Magnetic_Presence = 6, Open_Closed = 9, Button = 11, Control_2_Output = 12, ID = 14, Accelerometer_Snapshot = 15, Accelerometer_Impact_Detection = 16, Activity_Number = 19, Accelerometer_Motion_Over_Time = 20, Lux = 21, Current_20mA = 22, Infared_Motion = 23, Flex = 24, Liquid_Tape_8 = 26, Light_Detection = 27, Compass = 28, Humidity_Grains_Per_Pound = 30, AC_Voltage_500 = 32, Vehicle_Detection = 33, CO_Gas = 34, High_Temperature = 35, Liquid_Tape_24 = 36, Vehicle_Counter = 39, Vehicle_Speed = 40, Pressure = 41, Activity_Timer = 42, Humidity = 43, Range_Extender = 45, Low_Temperature = 46, Pulse_Counter_4_Input = 47, Pulse_Counter_1_Input = 48, Seat_Occupancy = 51, Air_Flow_Detection = 52, Current_1mA = 55, DC_Voltage_50V = 59, Weighted_Activity = 60, AC_Voltage_Detection = 64, Water_Temperature = 65, Asset = 66, Ultrasonic_Ranger = 67, Pulse_Counter_2_Input = 69, Resistance = 70, DC_Voltage_Detection = 71, DC_Voltage_5V = 72, Filtered_Pulse_Counter_1_Input = 73, DC_Voltage_10V = 74, Tilt = 75, Preassure_50PSI = 79, CT_Power = 81, Preassure_300PSI = 82, Preassure_NPSI = 83, Duct_Temperature = 84, Short_Range_Asset = 85, Current = 89, Horizon_Pulse_Counter = 90, Current_Zero_To_Twenty_Amp = 93, Current_Zero_To_OneFifty_Amp = 94, VibrationMeter = 95, DeltaResistance = 99 }

File

Enumerations.cs

Members

Members	Description
DC_Voltage_1V = 1	Measures Voltage between 0 and 1.2 Volts DC
Temperature = 2	Measures Temperature between -40 C and 120 C
Dry_Contact = 3	Reports state of dry contact loop
Water_Detection = 4	Reports presence or absence of water
Activity_Detection = 5	Reports presence or absence of activity (vibrations)
Magnetic_Presence = 6	Reports presence of magnet
Open_Closed = 9	Reports if door or window is open or closed
Button = 11	Reports if button is pressed
Control_2_Output = 12	Allows control of two 10 or 30 Amp relays.
ID = 14	Indicates that sensor is within range of gateway
Accelerometer_Snapshot = 15	snapshot of 3 axis accelerometer
Accelerometer_Impact_Detection = 16	Reports detection of force exceeding defined value
Activity_Number = 19	Reports presence or absence of activity (vibrations)
Accelerometer_Motion_Over_Time = 20	Measures acceleration and reports Average and Maximum acceleration in three axis.
Lux = 21	Measures Light in LUX
Current_20mA = 22	Measures current between 0 and 20 mA
Infared_Motion = 23	Reports motion picked by by passive infrared lense
Flex = 24	Measures amount of flex present
Liquid_Tape_8 = 26	Measures inert liquids up to 8 inches
Light_Detection = 27	Reports the presence or absence of light
Compass = 28	reports orientation in degrees from magnetic north
Humidity_Grains_Per_Pound = 30	Measures moisture volume in air
AC_Voltage_500 = 32	Measures Voltage between 0 and 500 Volts AC
Vehicle_Detection = 33	Reports presence of magnetic alterations (Iron in Vehicle)
CO_Gas = 34	Measures amount of CO gas in parts per million, readings start sub 30 ppm
High_Temperature = 35	Measures Temperature between -50 C and 370 C
Liquid_Tape_24 = 36	Measures inert liquids up to 24 inches
Vehicle_Counter = 39	Reports the number of vehicles passing sensor during report interval.
Vehicle_Speed = 40	Reports the speed of vehicle between two points (known distance). Requires additional Vehicle Counter sensor for far end of calculation.
Pressure = 41	Measures pressure range dependent on mated sensing element.
Activity_Timer = 42	Tallies total amount of time activity is recorded.
Humidity = 43	Reports the relative humidity and approximate temperature of an environment.
Low_Temperature = 46	Measures Temperature between -200 C to 162 C.
Pulse_Counter_4_Input = 47	Tallies number of pulses from 4 distinct inputs.
Pulse_Counter_1_Input = 48	Tallies number of pulses from connected device.
Seat_Occupancy = 51	Reports the presence of weight in seat.
Air_Flow_Detection = 52	Reports Air flow.
Current_1mA = 55	Measures current between 0 and 1 mA.
DC_Voltage_50V = 59	Measures Voltage between 0 and 50 Volts DC.
AC_Voltage_Detection = 64	Reports presence of AC voltage (20 - 500 Volts AC).
Water_Temperature = 65	Measures Temperature between -40 C and 120 C.
Asset = 66	Indicates that sensor is within range of gateway.
Ultrasonic_Ranger = 67	Measures distance using active sonar.
Pulse_Counter_2_Input = 69	Tallies number of pulses from 2 distinct inputs.
Resistance = 70	Measures resistance of a circuit.
DC_Voltage_Detection = 71	Measures Voltage between 0 and 50 Volts DC.
DC_Voltage_5V = 72	Measures Voltage between 0 and 5 Volts DC.
Filtered_Pulse_Counter_1_Input = 73	Tallies number of pulses from connected device. Will detect either dry contact pulses or actively driven pulses.
DC_Voltage_10V = 74	Measures Voltage between 0 and 10 Volts DC.
Tilt = 75	Reports the tilt in degrees on two axis.
Preassure_50PSI = 79	Reports up to 50 psi.
CT_Power = 81	Reports Current transducer Power as kwh.
Preassure_300PSI = 82	Reports up to 300 psi.
Preassure_NPSI = 83	Reports up to 50 - 300 based on your current transducer.
Duct_Temperature = 84	Reports the temperature in degrees.
Short_Range_Asset = 85	Like the normal assest sensor only with a shorter range .
Current = 89	Reports the current .
Horizon_Pulse_Counter = 90	Tallies number of pulses from an input.
Current_Zero_To_Twenty_Amp = 93	Reports the current from 0 to 20 amps .
Current_Zero_To_OneFifty_Amp = 94	Reports the current .
VibrationMeter = 95	unknown
DeltaResistance = 99	unknown

Contents | Index | Home

What do you think about this topic? Send feedback!