eSensorApplication Enumeration

Application type of sensor. Certain settings are interpreted differently for different types of sensors

Syntax

public enum eSensorApplication { DC_Voltage_1V = 1, Temperature = 2, Dry_Contact = 3, Water_Detection = 4, Activity_Detection = 5, Magnetic_Presence = 6, Open_Closed = 9, Button = 11, Control_2_Output = 12, Local_Alert = 13, ID = 14, Accelerometer_Snapshot = 15, Accelerometer_Impact_Detection = 16, Activity_Number = 19, Accelerometer_Motion_Over_Time = 20, Lux = 21, Current_20mA = 22, Infared_Motion = 23, Flex = 24, Liquid_Tape_8 = 26, Light_Detection = 27, Compass = 28, Humidity_Grains_Per_Pound = 30, AC_Voltage_500 = 32, Vehicle_Detection = 33, CO_Gas = 34, High_Temperature = 35, Liquid_Tape_24 = 36, Activity_Timer = 42, Humidity = 43, Range_Extender = 45, Low_Temperature = 46, Pulse_Counter_4_Input = 47, Pulse_Counter_1_Input = 48, SevenSwitchStateBase = 49, Seat_Occupancy = 51, Air_Flow_Detection = 52, Gas_H2S = 56, DC_Voltage_50V = 59, AC_Voltage_Detection = 64, Water_Temperature = 65, Asset = 66, Ultrasonic_Ranger = 67, Pulse_Counter_2_Input = 69, Resistance = 70, DC_Voltage_Detection = 71, DC_Voltage_5V = 72, Filtered_Pulse_Counter_1_Input = 73, DC_Voltage_10V = 74, Tilt = 75, Basic_Control = 76, Water_Area = 78, Preassure_50PSI = 79, Preassure_300PSI = 82, Preassure_NPSI = 83, Duct_Temperature = 84, Thermocouple = 86, Filtered_Pulse_Counter = 90, Quad_Temperature = 92, Current_Zero_To_Twenty_Amp = 93, Current_Zero_To_OneFifty_Amp = 94, VibrationMeter = 95, Thermostat = 97, Alta_PIR = 101, Air_Quality = 102, Differential_Pressure = 103, Ultrasonic_Ranger_Industrial = 105, CO2_Meter = 106, Light_Sensor = 107, Three_Phase_Current_Meter = 109, Advanced_Vibration = 111, DC_Voltage_200V = 113, Air_Speed = 114, CO_MeterBase = 116, Car_Detect = 119, Current_Zero_To_500_Amp = 120, Voltage_Meter_500 = 122, Voltage_Detect_200_VDC = 123, Propane = 124, Geforce_MaxAvg = 126, Handheld_Food_Probe = 128, Three_Phase_500_Amp_Meter = 129, Tilt_Detection = 130, Soil_Moisture = 135, Digital_Temperature = 136, Three_Phase_20_Amp_Meter = 137, PIR_Humidity = 138, LightSensor_PPFD = 139 }

File

Enumerations.cs

Members

Members	Description
DC_Voltage_1V = 1	Measures Voltage between 0 and 1.2 Volts DC
Temperature = 2	Measures Temperature between -40 C and 120 C
Dry_Contact = 3	Reports state of dry contact loop
Water_Detection = 4	Reports presence or absence of water
Activity_Detection = 5	Reports presence or absence of activity (vibrations)
Magnetic_Presence = 6	Reports presence of magnet
Open_Closed = 9	Reports if door or window is open or closed
Button = 11	Reports if button is pressed
Control_2_Output = 12	Allows control of two 10 or 30 Amp relays.
Local_Alert = 13	Device that'll display assigned sensor notification details
ID = 14	Indicates that sensor is within range of gateway
Accelerometer_Snapshot = 15	snapshot of 3 axis accelerometer
Accelerometer_Impact_Detection = 16	Reports detection of force exceeding defined value
Activity_Number = 19	Reports presence or absence of activity (vibrations)
Accelerometer_Motion_Over_Time = 20	Measures acceleration and reports Average and Maximum acceleration in three axis.
Lux = 21	Measures Light in LUX
Current_20mA = 22	Measures current between 0 and 20 mA
Infared_Motion = 23	Reports motion picked by by passive infrared lense
Flex = 24	Measures amount of flex present
Liquid_Tape_8 = 26	Measures inert liquids up to 8 inches
Light_Detection = 27	Reports the presence or absence of light
Compass = 28	reports orientation in degrees from magnetic north
Humidity_Grains_Per_Pound = 30	Measures moisture volume in air
AC_Voltage_500 = 32	Measures Voltage between 0 and 500 Volts AC
Vehicle_Detection = 33	Reports presence of magnetic alterations (Iron in Vehicle)
CO_Gas = 34	Measures amount of CO gas in parts per million, readings start sub 30 ppm
High_Temperature = 35	Measures Temperature between -50 C and 370 C
Liquid_Tape_24 = 36	Measures inert liquids up to 24 inches
Activity_Timer = 42	// Reports the number of vehicles passing sensor during report interval. // // Reports the speed of vehicle between two points (known distance). Requires additional Vehicle Counter sensor for far end of calculation. // // Measures pressure range dependent on mated sensing element. // Tallies total amount of time activity is recorded.
Humidity = 43	Reports the relative humidity and approximate temperature of an environment.
Low_Temperature = 46	Measures Temperature between -200 C to 162 C.
Pulse_Counter_4_Input = 47	Tallies number of pulses from 4 distinct inputs.
Pulse_Counter_1_Input = 48	Tallies number of pulses from connected device.
SevenSwitchStateBase = 49	Pill Box
Seat_Occupancy = 51	Reports the presence of weight in seat.
Air_Flow_Detection = 52	Reports Air flow.
Gas_H2S = 56	// Measures current between 0 and 1 mA. //
DC_Voltage_50V = 59	Measures Voltage between 0 and 50 Volts DC.
AC_Voltage_Detection = 64	Reports presence of AC voltage (20 - 500 Volts AC).
Water_Temperature = 65	Measures Temperature between -40 C and 120 C.
Asset = 66	Indicates that sensor is within range of gateway.
Ultrasonic_Ranger = 67	Measures distance using active sonar.
Pulse_Counter_2_Input = 69	Tallies number of pulses from 2 distinct inputs.
Resistance = 70	Measures resistance of a circuit.
DC_Voltage_Detection = 71	Measures Voltage between 0 and 50 Volts DC.
DC_Voltage_5V = 72	Measures Voltage between 0 and 5 Volts DC.
Filtered_Pulse_Counter_1_Input = 73	Tallies number of pulses from connected device. Will detect either dry contact pulses or actively driven pulses.
DC_Voltage_10V = 74	Measures Voltage between 0 and 10 Volts DC.
Tilt = 75	Reports the tilt in degrees on two axis.
Basic_Control = 76	Allows a user to control a power relay
Water_Area = 78	Senses immediate presence of water anywhere along rope
Preassure_50PSI = 79	Reports up to 50 psi.
Preassure_300PSI = 82	// Reports Current transducer Power as kwh. // Reports up to 300 psi.
Preassure_NPSI = 83	Reports up to 50 - 300 based on your current transducer.
Duct_Temperature = 84	Reports the temperature in degrees.
Thermocouple = 86	Measures Temperature based on K-Type Thermocouple
Filtered_Pulse_Counter = 90	Tallies number of pulses from an input.
Quad_Temperature = 92	Has 4 Probes that each measure Temperature between -40 C and 125 C
Current_Zero_To_Twenty_Amp = 93	Reports the current from 0 to 20 amps .
Current_Zero_To_OneFifty_Amp = 94	Reports the current .
VibrationMeter = 95	Reports presence or absence of activity (vibrations)
Thermostat = 97	Measures Temperature between -40 C and 85 C and Controls HVAC equipment
Alta_PIR = 101	Reports motion picked by passive infrared lense
Air_Quality = 102	unknown
Differential_Pressure = 103	unknown
Ultrasonic_Ranger_Industrial = 105	Measures distance using active sonar
CO2_Meter = 106	unknown
Light_Sensor = 107	Measures Light in LUX
Three_Phase_Current_Meter = 109	Measure 3 phases and reports the current.
Advanced_Vibration = 111	Advanced vibration monitoring
DC_Voltage_200V = 113	Measures Voltage between 0 and 200 Volts DC.
Air_Speed = 114	unknown
CO_MeterBase = 116	unknown
Car_Detect = 119	unknown
Current_Zero_To_500_Amp = 120	unknown
Voltage_Meter_500 = 122	unknown
Voltage_Detect_200_VDC = 123	unknown
Propane = 124	unknown
Geforce_MaxAvg = 126	unknown
Handheld_Food_Probe = 128	unknown
Three_Phase_500_Amp_Meter = 129	unknown
Tilt_Detection = 130	unknown
Soil_Moisture = 135	unknown
Digital_Temperature = 136	unknown
Three_Phase_20_Amp_Meter = 137	unknown
PIR_Humidity = 138	unknown
LightSensor_PPFD = 139	unknown

Contents | Index | Home

What do you think about this topic? Send feedback!