C# Mine
|
Allows for the update of the specific type of sensor.
Parameters |
Description |
ISensor sens |
sens the Sensor object to be updated |
double? heartBeat |
How often the sensor communicates with the gateway if no activity recorded. |
double? awareStateHeartBeat |
How often the sensor communicates with the gateway while in Aware State. |
int? assessmentsPerHeartBeat |
How many times between heartbeats a sensor will check its measurements against its thresholds to determine whether it will enter the Aware State. Warning if your sensor firmware is less than 2.5.2.0 Setting assessments greater than one will cause this sensor to not self elect follow a gateway to a new channel. if you reform your gateway you will need to power cycle the sensor for it to link on a new channel. |
double? minimumThreshold |
Any assessments below this value will cause the sensor to enter the Aware State. |
double? maximumThreshold |
Any assessments above this value will cause the sensor to enter the Aware State. |
double? Hysteresis |
A buffer to prevent the sensor from bouncing between Standard Operation and Aware State when the assessments are very close to a threshold. For example, if a Maximum threshold is set to 90 degrees and a Hysteresis of 1 degree, then once the sensor takes an assessment of 90 degrees and enters the Aware State it will remain in the Aware state until the temperature readings drop to 89 degrees similarly, at the minimum threshold the temperature will have to rise a degree above the threshold to return to Standard Operation. |
int? zeroCapacitance |
pico Farads that represents 0% |
int? hundredCapacitance |
pico Farads that represents 100% |
int? measurementDelay |
Required amount of time the sensor needs to actively discharge its capacitance (connect means pin to digital ground) between measurements to ensure there is no biasing from previous measurement |
Copyright (c) 2023. All rights reserved.
|
What do you think about this topic? Send feedback!
|